Roofing Services in High Falls, NY
Our service list isn't complicated: we fix roofs, replace roofs, and install new ones. We also handle gutters, metal systems, and flat roofing for commercial buildings across High Falls.
Roof Replacement
Owens Corning Duration with SureNail technology or CertainTeed Landmark with NailTrak for reliable fastening in high-wind zones. Both meet ASTM D3462 and carry Class A fire ratings per UL 790. In New York, we recommend the high-wind versions rated to ASTM D7158 Class H, which is 130 mph wind warranty. Full system install qualifies for Owens Corning Preferred Protection or CertainTeed SureStart Plus warranty.
Get a Free Quote →
Roof Repair
Most roof leaks in High Falls come from one of five places: pipe boots, step flashing at walls, valley flashing, damaged shingles, or failed seals around skylights. We find the actual source. Not just the drip point in your ceiling. And fix it right. Water travels along rafters and sheathing before it drips, so the leak location and the damage location are often 10 feet apart.
Get a Free Quote →
Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →
New Roof Installation
New construction means we get to do everything right from scratch. No compromises, no working around someone else's mistakes. Ice and water shield where it belongs, properly lapped underlayment, correct nailing patterns, and ventilation sized to the space. That's a roof that lasts.
Get a Free Quote →
Metal Roofing
We install 24-gauge and 26-gauge steel standing seam panels in Galvalume and pre-painted finishes. Concealed fastener clips allow the panels to expand and contract with temperature changes without stress on the fasteners. That's why standing seam doesn't leak. The clips float.
Get a Free Quote →
Shingle Roofing
GAF Timberline HDZ. The best-selling shingle in North America. With StrikeZone nailing area for consistent fastener placement. Class A fire rating per UL 790, Class 4 impact resistance per UL 2218 (when installed in the GAF Roof System), and Class H wind rating per ASTM D7158 (130 mph). We install Timberline in the full GAF system to qualify for Golden Pledge warranty: 25-year non-prorated workmanship plus 50-year materials with WindProven limited wind warranty (no max speed). That warranty is why we recommend GAF for most High Falls homes.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in High Falls. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →
Commercial Roofing
For commercial kitchens and restaurants in High Falls, PVC membrane is the only option that resists animal fat and chemical exposure from rooftop grease exhaust. We install IB Roof Systems and Duro-Last PVC with heat-welded seams and custom accessories. Modified bitumen with SBS or APP polymer-modified asphalt for high-traffic commercial roofs. Two-ply systems with 20-year NDL (No Dollar Limit) warranties from Johns Manville or Firestone.
Get a Free Quote →
Gutter Installation
We custom-form seamless aluminum gutters on-site from a continuous coil of .027 gauge stock. No factory seams means no seam failures. We form them to the exact length your fascia requires. One piece, one gutter, no leaks.
Get a Free Quote →
Roof Inspection
Annual inspections catch small problems early. A cracked pipe boot is a $150 repair. A year of water leaking through that crack causes $3,000+ in ceiling, insulation, and drywall damage. We recommend an inspection every 2-3 years for newer roofs, annually for roofs over 15 years.
Get a Free Quote →
Emergency Roof Repair
Emergency protocol for active water intrusion: (1) interior containment. Buckets, plastic sheeting, water extraction if accessible, (2) exterior tarping with 20x30 heavy-duty poly sheeting over damaged area extending minimum 4 feet past damage on all sides, (3) secure with 2x4 nailer boards lag-screwed to the roof deck (not through shingles), (4) secondary tarp overlap for multi-section damage, (5) document with timestamped photos for insurance. Permanent repair scheduled within 48-72 hours once materials are sourced.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →